|
Tools Required: 13mm wrench or socket
Time to Install: Approximately 5 minutes, each
side
Difficulty Level (Scale 1-10): 1
(Oil/filter change is rated 2, Adjusting valves is
5)
- Replace the two nuts from the bottom valve
cover with the supplied mounting nuts (2).
Figure 1.
- Install HeetSheet using the supplied
stainless steel hex screws (2) and flat washers
(2). Figure 2.
- Repeat on opposite side of engine.
Note: You're done.
- Okay, I'm ready to
order a kit
One owner's
experience
|
Figure 1.
Figure 2. Click on picture for before and
after results
Completed installations
|
