|
|
|
|
|
|
|
Ultimate
Strut tm Porsche
911, 912, 993 front $39.95 Contact
us for international shipping
rates Lightweight
hood support for 911 Tired
of replacing gas struts on your Porsche?
Using
a broom handle to support your hood? Product
Details: Ultimate
Strut attaches to an existing factory mounting
hole. No drilling or body alterations are
required. The
aluminum rod end provides 23º of angularity to
position the support tube exactly where needed
under the hood. The
tip of the carbon fiber support tube contains a
high-strength dymium magnet and is cushioned by a
vinyl cap. The support tube receptacle (white
object under the hood above) also contains a high
strength magnet . The two magnets perform the
following functions: 1)
Place the nylon receptacle anywhere under the hood.
The magnetic receptacle allows ultimate flexibility
in establishing a support location on a factory
metal hood. Note:
For fiberglass or carbon fiber hoods, attach the
receptacle with silicone glue. 2)
The mutual attraction of the two magnets helps the
support tube "find" the receptacle. As
supplied, trim the support tube to the final
installed length as desired. With the trunk lid
closed, the support tube lays flat along the inner
edge of the trunk. The
complete front Ultimate Strut kit weighs less than
3.5 oz. All
hardware is either zinc-plated or non-ferrous
(stainless steel and nylon) for corrosion
protection. Download
a product information sheet (PDF). |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|
